長沙耐磨奧博矩形金屬軟管選擇

結構與用途

矩形金屬軟管采用全金屬結構。該產品符合JB/GQ058285企業聯合標準，適應于各類金屬切屑機床及切割機床。防止高熱鐵屑對您供電、水、汽線路的損傷，保護勞動安全。
選形

1.注

A×B×L-裝配形式；L-軟管長度，包括聯接器裝配，形式見軟管裝配形式圖：Ⅰ～Ⅸ

2.特殊接頭形式：a-c；

例：25×50×1200-Ⅰ、25×50×1200-AB-Ⅲ

Construction and applications

The rectangle metalic hosed has a totally metalic construction.The product is according to the standard JB/GQ58285 and suitable for all types of metal cutting machine tools and slicing machines.Protect working personnel, electric circuits,water supplying piping systems and gas loops from damaging or injured.

Model selection
1. Give a clear indication of the specifications and medel numbers as given below;
A X B X L - assembly type; L-hose length, including the assembly of the connectors, please see the hose assembly figrue for specifics:Ⅰ～Ⅸ
2. Special connector types: a - c;
Example:25×50×1200-Ⅰ、25×50×1200-AB-Ⅲ

軟管接頭尺寸圖 Connector dimension figure

注 1.水平放置時下方應設置具有足夠長度的拖板。
2.水平放置時允許選用超出表中規定的長度，但建議在適當?shù)奈恢蒙显O(shè)計滾動支承點，以防軟管下彎。
Note: 1.When laid horizontally, a drag plate with enough length underneath should be provided.
2. When laid horizontally, a length that exceeds the length as given the table is allowed to use, but a rolling backing point is recommended to add at an appropriate position so as to avoid hose bending.
接頭尺寸及規格參數表Connector`s dimensions and specifications