機床商務網
詳細介紹
| Description | TKV-1100H | TKV-1100HM |
| Capacity | ||
| Max. swing dia. | 1320 mm | |
| Max. turning dia. | 1100 mm | |
| Std. turning dia. | 990 mm | |
| Max. turning height | 920 mm | 900 mm |
| Spindle | ||
| Hydraulic chuck | 1000 mm (40") / manual 4-jaw chuck | |
| Range of table speed | 5-850 rpm | |
| Front bearing dia. | 200 mm | |
| Spindle nose | ISO 702-4 5 (Ø 380 mm) | |
| Turret | ||
| Turret type | H12 | |
| Number of tool position | 12 | |
| Tool Size | Ø 32, Ø 50 mm | |
| Feed | ||
| Rapid rate (X-axis) | 20 M/min | |
| Rapid rate (Z-axis) | 20 M/min | |
| Horizontal travel (X-axis) | 625 mm | |
| Horizontal travel (Z-axis) | 1000 mm | |
| Cutting federate | 0.001-500 mm/rev | |
| Feed override | 0 - 150 % | |
*The Specifications are subject to change without prior notice.
H12 Turret with milling (Turning)
H12 Turret
H12 Turret (Drilling)
Air condition for electrical cabinet
Special chuck (Options)
TKV-460H/HT/HM/HMT
V6 Turret
V4 Turret
Options:
Second control box
Coolant system (3 bar and more)
High and low pressure of hydraulic chuck
Tool presetter
Oil mist collector
External counter for each insert
Oil skimmer (Disk type)
Finger hydraulic chuck
Simultaneous double tooling device
High torque main spindle motor with built-in dual speed gearbox
Table-speed and torque
Dimensions
Unit: mm
| A | B | C | D | E | F | G | H | |
| TKV-460H | 990 | 2855 | 1620 | 457 | 2780 | 1140 | 3430 | 650 |
| TKV-760H | 1080 | 3440 | 1950 | 505 | 2980 | 1200 | 3670 | 710 |
| TKV-860H | 1200 | 3900 | 2100 | 655 | 3288 | 1200 | 3870 | 860 |
| TKV-1100H | 1250 | 4042 | 2710 | 755 | 3700 | 1250 | 4230 | 1030 |
| TKV-460HM | 990 | 2815 | 1620 | 457 | 2780 | 1140 | 3430 | 650 |
| TKV-760HM | 1080 | 3450 | 1950 | 505 | 2980 | 1200 | 3670 | 710 |
| TKV-860HM | 1200 | 3872 | 2100 | 655 | 3288 | 1200 | 3870 | 860 |
(Option: V4 / V6 / V8)
| A | B | C | D | E | F | G | H | |
| TKV-460H | 980 | 2950 | 2220 | 400 | 2670 | 975 | 3435 | 630 |
| TKV-760H | 1175 | 3680 | 2070 | 575 | 3180 | 1015 | 3855 | 845 |
| TKV-860H | 1175 | 4000 | 2070 | 575 | 3180 | 1015 | 3855 | 845 |
| TKV-1100H | 1250 | 4042 | 2710 | 755 | 3700 | 1250 | 4230 | 1030 |
Standard Tooling System (H12 Turret)
Unit: mm
Standard Tooling System (H12 Turret With Milling)
Unit: mm
Electrical Cabinet
Easy maintenance circuit arrangement.
Suitable all kinds of environment.
CE standard available.
CNC Controller
Fanuc 0i-T
Siemens 840D
Work Range: H12 Turret (Unit: mm)
TKV-460H
TKV-760H
TKV-860H
TKV-1100H
Tool Interference: (Unit: mm)
Standard Accessories
- Spindle orientation
- Manual 4-jaw chuck (for TKV-1100H)
- Hydraulic 3-jaw solid chuck & cylinder, size as spec (except TKV-1100H)
- Hydraulic power unit
- Soft jaw x 1 set for hydraulic chuck (except TKV-1100H)
- Foot switch for hydraulic chuck (except TKV-1100H)
- Automatic lubrication system
- Coolant through turret
- Coolant flushing system with tank
- Heat exchanger for electrical cabinet
- Splash guard
- Work light
- Warning light (R / Y / G)
- Workpiece counter (CNC Controller)
- Chain type chip converor & chip trolley
- Manual for operation & maintenance
- Manual for electrical & hydraulic circuit diagram
- Electronic manual for controller
- Tool box with tool kits
- Leveling bolts & pads
Options
- Higher power motor, αil 50 (45/55kw), αil 30 (30/37kw), αil 40(37/45kw)
- Extra hydraulic chuck & cylinder (for TKV-1100)
- Dual speed gear box for main spindle
- High & low pressure chucking
- Chuck position sensor
- Hard jaw of chuck
- Manual guide i
- Oil mist collector
- Auto door (Automatic opening & closing of main door)
- Special tool holder
- High pressure coolant through turret
- Tool presetter
- Turning tools
- External counter display for each insert
- Air condition for electrical cabinet
- Oil skimmer (Disk type)
- Scrap type chip conveyor with chip trolley
- Jig & fixture
- Turnkey project
- Power transtormer
- CE mark
機床商務網